| ORIGINAL ARTICLE |
|
| Year : 2022 | Volume
: 12
| Issue : 2 | Page : 114-121 |
|
|
Implementation and validation of a novel noninvasive blood pressure measurement algorithm based on oscillometric method with obtaining international hypertension standards
Sahar Karimian1, Mohammadreza Yazdchi2, Reza Hajian3
1 Department of Biomedical Engineering, University of Isfahan, Isfahan, Iran
2 Department of Biomedical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
3 Department of Biomedical Engineering, Amirkabir University of Technology, Tehran, Iran
Correspondence Address:
Mohammadreza Yazdchi
Department of Biomedical Engineering, Faculty of Engineering, University of Isfahan, Isfahan
Iran
 Source of Support: None, Conflict of Interest: None
DOI: 10.4103/jmss.jmss_123_21
|
|
|
Background: One of the most prevalent methods in noninvasive blood pressure (BP) measurement with cuff is oscillometric, which has two different types of deflation, including linear and step deflation. With this approach, in addition to designing a novel algorithm by the step deflation method, a sample of its module was constructed and validated during clinical tests in different hospitals. Method: In this study, by controlling the valve, the pressure would be deflated through optimized steps. By real-time processing on the obtained signal from the pressure sensor, pulses in each step would be extracted. After that, in offline mode, mean arterial pressure is estimated based on curve fitting. Result: A BP simulator, various modules, and an auditory method were used to validate the algorithm and its results. During clinical tests, 80 people (men and women), 11 dialysis patients, and 69 non-dialysis (healthy or with other diseases) in the age range of 17–85 years participated. Conclusion: The obtained results compared with the BP simulator are in the standard range according to the international medical standards of the British Hypertension Society (BHS) and the US Association for the Advancement of Medical Instrumentation (AAMI), which are the global standard of comparison in this field.
|
|
|
|
| [FULL TEXT] [PDF]* |
|
 |
|
